Skip to content
S-TECH Solutions

Hardware

Smart Card Readers

Desktop, embedded and contactless readers

6 types listedSupplied & commissionedBulk & OEM available

Wherever a card is used there has to be something to read it: a desktop reader at an enrolment counter, an embedded module inside a kiosk, a wall reader at a door. We supply contact, contactless and combination readers, with the drivers and the integration into our software already done.

In plain words

A device that powers a card's chip and exchanges data with it — by contact through the gold pads, or contactlessly over 13.56 MHz. Readers connect over USB, serial, Wiegand or Ethernet depending on where they are used.

The range

6 types we supply

Model names and exact specifications change as manufacturers revise their ranges. These are indicative — your quotation carries the current specification.

USB contact reader

Desktop reader for contact smart cards.

StandardISO 7816, PC/SC, EMV L1
InterfaceUSB
UseEnrolment desks, PKI login, banking

Contactless desktop reader

Tap reader for a counter or an enrolment station.

StandardsISO 14443A/B, ISO 15693, NFC
InterfaceUSB HID / PC/SC
Range0–5 cm

Combination reader

Contact and contactless in one unit.

Slots1 contact + contactless field
UseMixed card estates, government counters

Wall-mount access reader

Door-side reader wired to a controller.

OutputWiegand 26/34, RS485, OSDP
RatingIP65
OptionsKeypad, LED, buzzer

Embedded reader module

Board-level module for kiosks and machines.

InterfaceUART / SPI / I2C / USB
UseKiosks, vending, turnstiles, custom devices

Mobile NFC reader

Bluetooth reader for phones and tablets in the field.

ConnectionBluetooth
UseField verification, mobile enrolment, inspections

What you get from us

Not just the box

PC/SC and OSDP support

Standards-compliant readers, so they work with our software and with anything else you already run.

Secure key handling

Reader keys are provisioned to your card scheme rather than left on defaults, which is what makes a DESFire deployment actually secure.

Drivers and SDK included

We supply working drivers and sample code, and our own software talks to these readers out of the box.

Indoor and outdoor

IP65 wall readers for gates and outdoor doors, and vandal-resistant metal housings where needed.

Where it is used

Typical applications

  • Card enrolment and issuance desks
  • Door and turnstile access points
  • Cashless canteen terminals
  • Kiosks and self-service machines
  • Field verification of credentials

Solutions that use it

Compatible software

What it runs with

It also works with software we did not write. We integrate at protocol level, so this hardware can be driven from your own system — that is a service we offer.

Bulk, MOQ and OEM

Readers supplied with cables, mounting plates and configuration. Bulk pricing on wall readers for multi-door rollouts.

Ask for volume pricing

Datasheet

Full specifications, model numbers and selection guidance for smart card readers.

Which smart card readers do you need?

Tell us the item, the surface, the environment and the range, and we will specify it — then prove it with a read-rate trial on your own goods before you order.

Or call +91 97305 32888 — Monday to Saturday, 9:30 am to 6:30 pm.

CallWhatsAppGet a Quote